Semiautomatic band saw machine to cut from 0° to 60° right and 45° left.

Head structure in special aluminium casting alloy.

Dynamometric blade tensioning.

Broken blade micro.

Blade cleaning brush integrated in the head protection cover.

Head feeding system with hydraulic cylinder and descent adjustment by flow valve olaced in front position.

Blade guide with combined action of side bearings, carbide plates and top bearing.

Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.

Output shaft of the reduction gear box Ø 40 mm and motor wheel connection with a keyless shaft/hub connection.

Version 2 speed 35/70 m/min version VHZ 16÷120 m/min.

Large material support surface, manual positioning closing vice with hydraulic locking cylinder.

Ergonomic working table and control panel.

Head rotation angle stop at 0°, 45° and 60°.

Degrees measuring system, graduated scale and rugged in construction locking lever.

Millimetric reference length stop measuring system.

Cutting length 0÷600 mm.

Heavy duty machine base, sheet metal construction, raised sides for chips & coolant containment.

Base unit door with key locking, housing the coolant pump & 20L capacity tank, plus the Hydraulic pump unit for bow cylinder movement, vice cylinder.

Electrical cabinet with 24VAC, lockable main switch and electric drive.

Total protection against highest voltage and short circuit current. Protection level IP 55.

Control panel with buttons and switsches for blade speed selection, lowering and lifting the head, coolant selection and lights for the eventual alarms detection.

The machine has a sensor which memorises the head starting position.

Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available).

Machine colours: yellow RAL 1018 and grey RAL 7036.