-
Semiautomatic band saw machine to cut from 0° to 60° right and 45° left.
-
Head structure in special aluminium casting alloy.
-
Dynamometric blade tensioning.
-
Broken blade micro.
-
Blade cleaning brush integrated in the head protection cover.
-
Head feeding system with hydraulic cylinder and descent adjustment by flow valve olaced in front position.
-
Blade guide with combined action of side bearings, carbide plates and top bearing.
-
Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.
-
Output shaft of the reduction gear box Ø 40 mm and motor wheel connection with a keyless shaft/hub connection.
-
Version 2 speed 35/70 m/min version VHZ 16÷120 m/min.
-
Large material support surface, manual positioning closing vice with hydraulic locking cylinder.
-
Ergonomic working table and control panel.
-
Head rotation angle stop at 0°, 45° and 60°.
-
Degrees measuring system, graduated scale and rugged in construction locking lever.
-
Millimetric reference length stop measuring system.
-
Cutting length 0÷600 mm.
-
Heavy duty machine base, sheet metal construction, raised sides for chips & coolant containment.
-
Base unit door with key locking, housing the coolant pump & 20L capacity tank, plus the Hydraulic pump unit for bow cylinder movement, vice cylinder.
-
Electrical cabinet with 24VAC, lockable main switch and electric drive.
-
Total protection against highest voltage and short circuit current. Protection level IP 55.
-
Control panel with buttons and switsches for blade speed selection, lowering and lifting the head, coolant selection and lights for the eventual alarms detection.
-
The machine has a sensor which memorises the head starting position.
-
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available).
-
Machine colours: yellow RAL 1018 and grey RAL 7036.