The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauges let you read the pressure change (in bar).
Code: RPM2

The option Ti allows carrying out the blade tensioning always correctly and when the machine is off, it allows the blade to loosen avoiding a useless static work. A micro switch controls that the blade is tensioned and, in case of the blade breaking, it stops all the other machine movements.
Code: TI

2 m long roller table  and max load 1000 Kg/m (h min 725 mm / h max 780 mm).
Code: RFP2 A

The swarf extractor evacuates the swarf from inside the machine basement.
Code: ST

The Nebula Oil fluid is an eco-friendly high quality lubricant which can be used for all mechanical works of chips removal on iron metals and light alloys. Its high lubricant property reduces the friction of the tool on the material during the working operation and inhibits the development of heat, which is the first cause of tool wear and of the bad quality of the worked surface. Available in packs of 5Kg.
Code: Nebula Oil

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide - max load 750 kg. H min 685 mm / H max 870 mm
Code: C3 - Cavalletto

With the option MT-A, teleassistance module, the machine can be connected to the internet in order to receive technical support from remote or through cooperation online.
Code: MT-A

Bio Cut is an ecological cooling fluid based on sythetic esters from renewable vegetable resources, free from boron, chlorine, sulphur and formaldehyde donors. It can work any kind of material from cast iron to titanium high alloy steels, without staining yellow alloys and aluminium while also ensuring an excellent level of cleanliness of both machined parts and machineries. Available in packs of 10Kg.

Code: Bio Cut

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX