It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

We recommend using this optional for strip cutting. Take special care when strip cutting round bars as the round bar could accidentally slip, thus breaking the sawband teeth.
Code: MV-AVD

This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauges let you read the pressure change (in bar).
Code: RPM2

Allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate placed the standard machines, this is not possible. It also allows a good view of reading in low light.
Code: VAT

Unloading side connection between machine and roller table.
Code: RRS

Screw chips conveyor.
Code: ST Coclea

The Nebula Oil fluid is an eco-friendly high quality lubricant which can be used for all mechanical works of chips removal on iron metals and light alloys. Its high lubricant property reduces the friction of the tool on the material during the working operation and inhibits the development of heat, which is the first cause of tool wear and of the bad quality of the worked surface. Available in packs of 5Kg.
Code: Nebula Oil

Roller table available in units 1 meter long each with idle rollers 400 mm wide and loading capacity of 300 Kg/m. Maximum height h=915mm, minimal height h=835mm.
Code: RP1GA-RP2GA