With the option MT-A, teleassistance module, the machine can be connected to the internet in order to receive technical support from remote or through cooperation online.
Code: MT-A

Roller table available in units 1 meter long each with idle rollers 400 mm wide and loading capacity of 300 Kg/m. Maximum height h=915mm, minimal height h=835mm.
Code: RP1GA-RP2GA

Bio Cut is an ecological cooling fluid based on sythetic esters from renewable vegetable resources, free from boron, chlorine, sulphur and formaldehyde donors. It can work any kind of material from cast iron to titanium high alloy steels, without staining yellow alloys and aluminium while also ensuring an excellent level of cleanliness of both machined parts and machineries. Available in packs of 10Kg.

Code: Bio Cut

This option allows the worked pieces fall with the reuse of the water thanks to the below installed tank.
Code: SP-Zeus

This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauge lets you read the pressure change (in bar).
Code: RPM 2

We recommend using this optional for strip cutting. Take special care when strip cutting round bars as the round bar could accidentally slip, thus breaking the sawband teeth.
Code: MV-A

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX

Vice pressure regulation for the standard and for the vertical vices for the bundle cut (MV-A)
Code: RPM4