It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

The closing pressure adjustment of the vice RPM1,decreasing from the standard machine max. pressure, is used for materials having thin thickness and consequently that can be easily deformed. It is not possible to reduce the pressure value adjusted by the hydraulic system pressure switch under the safety value of 6 bar.
Code: RPM1

The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.
Code: SENS

This optional allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate as the one on the standard machines this was not possible. It also allows a good view of reading in low light.
Code: VAT OLIMPUS

By the VHZ optional the blade speed rotation can be changed acting on the proper keys.
Code: VHZ

Unloading side connection between machine and roller table.
Code: RRS

The kit M is used when the user sets the machine in manual cycle and not in semiautomatic cycle.
Code: KIT M

The loading side connection between machine and roller table specific for RE1G–RE2G roller tables.
Code: CREC