It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

The closing pressure adjustment of the vice RPM1,decreasing from the standard machine max. pressure, is used for materials having thin thickness and consequently that can be easily deformed. It is not possible to reduce the pressure value adjusted by the hydraulic system pressure switch under the safety value of 6 bar.
Code: RPM1

This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauges let you read the pressure change (in bar).
Code: RPM2

The machine may be equipped with a measure shaft for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RFP roller tables.
Code: FM..RSP

The Nebula Oil fluid is an eco-friendly high quality lubricant which can be used for all mechanical works of chips removal on iron metals and light alloys. Its high lubricant property reduces the friction of the tool on the material during the working operation and inhibits the development of heat, which is the first cause of tool wear and of the bad quality of the worked surface. Available in packs of 5Kg.
Code: Nebula Oil

The option Ti allows carrying out the blade tensioning always correctly and when the machine is off, it allows the blade to loosen avoiding a useless static work. A micro switch controls that the blade is tensioned and, in case of the blade breaking, it stops all the other machine movements.
Code: TI-Solar

The machine is equipped with two vices: one before the blade and one after the blade.In this way, both pieces of the bar are locked.
Code: DMS

Bio Cut is an ecological cooling fluid based on sythetic esters from renewable vegetable resources, free from boron, chlorine, sulphur and formaldehyde donors. It can work any kind of material from cast iron to titanium high alloy steels, without staining yellow alloys and aluminium while also ensuring an excellent level of cleanliness of both machined parts and machineries. Available in packs of 10Kg.

Code: Bio Cut

Rulliera folle dotata di 6 rulli con larghezza di 550mm disponibile in moduli di lunghezza di 2m. Capacità di carico di 1000Kg/m; h min. 1040mm, h max. 1095mm.
Code: RFP2 S

Special jaws for the bundle cutting for the Solar bandsaw. This option allows only the 0° cutting.


Code: GTP S