The option LX facilitates the operator during the cutting phase: a luminous red line is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX PLUTON AIR

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

To facilitate the handling and the loading of very long pieces it has been created the optional RPP (specifically for Pluton Air).
On the loading side of the band saw machine it is placed an idle roller moving pneumatically . During loading of the material to be cut, when vices are open, the roller lifts up facilitating the pieces sliding. When vices close, the roller lowers. At the end of the cut the roller automatically lifts up to facilitate the subsequent load.
Code: RPP

The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.
Code: SENS

RFPL two-meters long roller table with 1300 mm wide idle rollers and capacity of 500 Kg/m. Min. height h=870mm , max height h=930mm.
Code: RFPL2

Specific for Pluton Air. At about 270 mm from the work top, over the pushers, it is placed a suction hood of processing fumes. The output is arranged for connection of 2 nozzles where apply the vacuum cleaner (not supplied).
Code: PIAP

The Nebula Oil fluid is an eco-friendly high quality lubricant which can be used for all mechanical works of chips removal on iron metals and light alloys. Its high lubricant property reduces the friction of the tool on the material during the working operation and inhibits the development of heat, which is the first cause of tool wear and of the bad quality of the worked surface. Available in packs of 5Kg.
Code: Nebula Oil

Bio Cut is an ecological cooling fluid based on sythetic esters from renewable vegetable resources, free from boron, chlorine, sulphur and formaldehyde donors. It can work any kind of material from cast iron to titanium high alloy steels, without staining yellow alloys and aluminium while also ensuring an excellent level of cleanliness of both machined parts and machineries. Available in packs of 10Kg.

Code: Bio Cut

With this option QEL SMART the operator can put the control panel in the position He prefers, the connection cable is 2,5m long.
Code: QEL SMART

With this option the cutting cycle start can be executed using a pedal.
Code: ACP