It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

Roller table-machine connection on loading side.
Code: CRC

Special jaws 430 mm height for bundle cut.
Code: GTP

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX

The option LX facilitates the operator during the cutting phase: a luminous red line is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX PLUTON AIR

On machine Olimpus 1 it is available a second vice for material clamping in unloading side. This solution allows the material clamping on both sides of the blade and the trimming of the end of the material.
Code: M2

On machine Olimpus 2 it is possible to have a second vice for material clamping on unloading side for degree cutting 0°÷45°. This solution allows the material clamping on both sides of the blade and the trimming of the end of the material.
Code: M2G

MAO2:  Olimpus 2+VHZ cutting angle motorization.
MAO3: Olimpus 3+VHZ cutting angle motorization.

Code: MAO2

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

In the pulpit control panel version, the control panel may be placed according to the production necessities of the Costumer.
Code: QEL