LOGIN DOWNLOAD AREA

Atalanta

Home / Bandsaw machines Semiautomatic / Atalanta / Standard equipment
Modello segatrice Calipso Centauro Galactic Hercules Hercules Tubes Major Mercury Olimpus 1 Olimpus 1 XL Olimpus 2 Olimpus 2 XL Omega Pegasus Pegasus DS Pegasus XL Pluton Air Saturn Sirius Solar
Documentazione disponibile Download machine layout
Fotogallery
Dotazioni di serie
DOTM - Vertical vice
Device for vertical clamping of the material, hydraulic cylinder and manual positioning. During the cutting cycle the vertical cylinder works together with the vice for the material clamping.

Code: DOTM
LX - Laser lighting for cutting line
The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.

Code: LX
NB1 Box-NB2 Box - Sprayer for blade lubrification
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.

Code: NB1 Box-NB2 Box
QEL - Console control panel
In the pulpit control panel version, the control panel may be placed according to the production necessities of the Costumer.

Code: QEL
RFP2 - Roller table
2 m long roller table with idle rollers 550mm wide, max load 1000 Kg/m (h min 925 mm/h max 980 mm).

Code: RFP2
RM - Motorized roller
Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato
RPM1 - Vice pressure adjustment
The closing pressure adjustment of the vice RPM1,decreasing from the standard machine max. pressure, is used for materials having thin thickness and consequently that can be easily deformed. It is not possible to reduce the pressure value adjusted by the hydraulic system pressure switch under the safety value of 6 bar.

Code: RPM1
SD - Stress detector
The “SD –stress detector” optional surveys this stress from the motor ampere increase. Before the situation gets critical, the SD slightly lifts the blade from the material and then makes it get down for a no trouble cutting. During all these phases the blade keeps turning. The lapse of time of blade lifting is chosen by the Customer.

Code: SD
SENS - Control blade rotation
The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.

Code: SENS
TI - Hydraulic stretcher
The option Ti allows carrying out the blade tensioning always correctly and when the machine is off, it allows the blade to loosen avoiding a useless static work. A micro switch controls that the blade is tensioned and, in case of the blade breaking, it stops all the other machine movements.

Code: TI
VDA - Arc descent speed display
The cutting download movement speed is shown in mm /1' on a special display by menas of this option.

Code: VDA
Looking for a specific bandsaw for special materials?
Contact us, our staff will answer you as soon as possible.
CLICK HERE